Customer Service Technical Boot Tips

Support

Contact us directly

  • K2 Snowboarding

    413 Pine Street 3rd Floor
    Seattle, WA 98101
  • K2 Snowboarding Customer Service

    800-985-2191
  • Hours of Operation

    8AM to 5PM PST
    Monday-Friday
K2 Snowboarding Boot Tips

HEAT MOLDING K2 INTUITION LINERS

Please visit a K2 Snowboarding Authorized Dealer for a thorough and professional boot fitting experience. Click here to find a shop near you.

WARNING: Remove batteries before heat molding (batteries are located inside liner cuff).

Thermic Boots/Liner Information

Batteries will need to be connected before use. To connect, join the red connectors located inside liner cuff. The battery connector is protected with black tape. Remove the black tape and find the liner connector (could be concealed inside the liner material).

To charge batteries: Attach USB cable to charging cable on medial side of liner. Align white marks on cable. The thermic logo will turn green when charging is complete.

To adjust heat settings: Press the +/- button for 1-2 seconds to change heat setting.

Heating time:

  • Setting 1: 14 to 17.5 hours
  • Setting 2: 7 to 8.5 hours
  • Setting 3: 3.5 to 4.5 hours
  • Charging time: 6 to 7 hours

WARNING: Remove batteries before heat molding (batteries are located inside liner cuff).